Lost_Ships_Project_Landscape

Gothic Sector Lost Ships Game Boards

Step inside a derelict starship and bring grimdark boarding actions to life on your tabletop. Gothic Sector: Lost Ships is a fully modular spaceship interior — walls, doors, pillars, tiles and scatter — with optional LED- and smoke machine-ready floor cutouts so you can light up the deck like a haunted space hulk.

£79.00
Buy Now

Originally a runaway Kickstarter hit from designer Fabricator’s Lair, Gothic Sector: Lost Ships is a modular 3D-printed spaceship interior system built for grimdark skirmishes, grimdark boarding actions, and any 28–32mm tabletop game where you’d rather fight in tight corridors than open fields.

Pick your style, mix your themes, build your hull.

Choose your floor tiles

A complete deck-laying set of 20 tiles, available in any of the seven hull themes below — and in two finishes:

  • Solid — clean, ready to paint, weather and play
  • LED-ready — cutouts sized for standard LED strips, so you can light the deck from below for that lived-in starship glow

Choose your walls & scatter

A full structural set in your chosen theme:

  • 14 standard walls
  • 2 battle-damaged walls
  • 5 doorways
  • 5 pillars with separate caps
  • Scatter terrain pieces — crates, control panels, catwalks, hangar doors, windows and more

Seven hull themes

  • Human Gothic — towering cathedral architecture, sweeping arches and skull-marked pillars
  • Greater Good Xeno — clean lines, blocky panels, alien minimalism
  • Tombship — ancient, hieroglyph-etched halls of a long-dead xeno empire
  • Hiveship — biomechanical horror, all chitin, sinew and organic curves
  • Greenskin — patchwork brutality, riveted plate, dakka and dents
  • Space Elves — sleek, curving, eldritch precision
  • Space Dwarves — solid, bunker-grade industrial corridors built to last

All themes share the same modular footprint, so an Imperial-style boarding party can just as easily fight on the bones of a Tombship deck — mix freely.

 

Printed to order in your choice of theme, supplied raw and ready for priming and painting. The FDM tiles will be printed with top surface smoothing to minimise any imperfections, but this isn’t 100% accurate all the time. Some imperfections will still be there, but I’ve found that this actually helps to sell the old and beaten up effect. This is a LARGE print, so lead times are a bit longer on this one, up to a week or so. We try to keep a good supply in stock, but we’ll give you an accurate ETA upon order.

  • Important Safety Information

    ⚠️ WARNING: Choking hazard. Small parts. These products contain small 3D printed parts that can be a choking hazard if they come loose, or could potentially be quite sharp or pointy, and dangerous to handle incorrectly. Please take extra care when handling these items. Not suitable for children under 15 years.

  • Storage and Handling Information

    Unless otherwise stated in the product desctription above, this product is likely printed using PLA filament. Do not store in direct sunlight.

    This product should be primed before painting.

    We have optimised our PLA print proflies for strength, but unless otherwise stated, weapon items are not rated for active use, such as hammer or sword combat, or indeed, swigning with force. They are for display purposes only. Some items may have hollows for dowel rods or other strengthening parts, but these are not included.

    Every item is 3D printed to order, and as such, may have minor support marks, or may need minor surface smoothing in places. These will be minimised and hidden from the main view as much as possible, but every part is different, and some parts may need more supports than others.

    You can use a sanding tool or sandpaper to smooth surfaces. For helmets and other wearable items, a gloss finish is possible with several cycles of filler primer and sanding, along with specialised gloss paint.

    For sanding resin items ALWAYS wet sand and wear a filter mask that is rated for dust and VOCs. You do not want resin dust in your lungs.

  • Join the Community

    We offer a free-to-join community for customers who’d like to share ideas, request new items, ask questions and chat with other like-minded dice rollers. You’ll be added to this when you order, but can leave whenver you like. It’s handy to have for questions, and we’d love to help build a thriving community around the local tabletops.